SG Power

Mobile Earthing

Home / Mobile Earthing

Mobile Earthing

Mobile Earthing Electrode is a convenient way for all mobile Electrical, Electronic and communication equipments for Earthing / Grounding, it is a need for mobile equipments used in the Defence, Space programs, Telecommunication and Construction sites. Mobile Earth provides efficient and fast method for Eathing / Grounding.

Installation procedure For vertical setting

  • Dig approx… 100mm dia hole 1.2 mtr deep
  • Place Mobile Electrode inside the hole so that the handle is above the ground
  • Fill the hole with loose earth slurry
  • At the end of operations, pull the mobile electrode out of the ground.
  • Clean it mildly and repack for further usagr.

Installation procedure For Horizontal setting

  • Dig approx… 300 mm wide and 600 mm deep 1500mm ling trench
  • Place Moblie Electrode inside the hole so that the handle is above the ground
  • Fill the hole with loose earth slurry
  • At the end of operations pull the mobile electrode out of the ground.
  • Clean it mildly and repack for further usage.

 

Technical Parameters
  • Vertical Setting- Resistance ——- 32% of soil resistivity
  • Horizontal setting-resistance ——21% of soil resistivity
  • Capability of unbalance current withstanding —— 6.5 A
  • Short term duty for 1 sec —— 600 A
Material
  • Outer body ——- SS 304 L
  • Primary Electrode —— SS pipe/250 micron copper coated MS rod
Infill Compound
  • Presentation ——- Granular 0.2 mm to 2.5 mm
  • Colour/ smell —— Grey / indorous
  • Ph value —— 6.8 to 7.3 of 1000 gm/lit at 15 Degress C
  • Apprx. Number of operations —— 50 Times or 2 Years whichever is earlier – After this the refiling of mobile electrode is required